TM 55-1520-240-23-9
11-65
ASSEMBLE THRUST CONTROL (AVIM)
11-65
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Insertion/Extraction Tool for Crimp-Type Contacts,
No. 20 Size
Torque Wrench, 30 to 150 Inch-Pounds
Torque Wrench, 5 to 50 Inch-Pounds
Arbor Press
Drill Press
Roller Staking Kit
Bolt, 1/4 Inch x 2 Inches Long
Materials:
Lockwire (E231)
Epoxy Primer (E292)
Cable Strap (E376)
Dry Cleaning Solvent (E162)
Cloth (E120)
Gloves (E184.1)
Parts:
Cotter Pins
Spring Pin, Slotted
Washers
Personnel Required:
Medium Helicopter Repairer
Aircraft Electrician
Inspector
Aircraft Structural Repairer
References:
TM 55-1520-240-23P
TM 1-1520-253-23
General Safety Instructions:
Epoxy primer (E292) is flammable
and toxic. It can irritate skin and
cause burns. Use only with adequate
ventilation, away from heat and open
flame. Avoid contact with skin, eyes,
and clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Dry cleaning solvent (E162) is
combustible and toxic. Avoid contact
with skin, eyes, or clothing. Use
only with adequate ventilation, away
from open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
11-291
