TM 55-1520-240-23-9
11-63
DISASSEMBLE THRUST CONTROL (AVIM)
(Continued)
11-63
5.
Remove bolt (13), washer (14), and sleeve
bushing (15).
6.
Remove barrel nut (16) and retainer (17) from
sleeve bushing (15).
7.
Remove grip (18) from shaft (11) while feeding
cable (5) through shaft.
8.
Remove cotter pin (19), nut (20), two washers
(21), and bolt (22). Remove connecting link (23).
9.
Remove two bushings (24).
10.
Install small end of link (23) in arbor press. Press
out bearing (25). Remove link from arbor press.
11-287