TM 55-1520-240-23-9
11-63
DISASSEMBLE THRUST CONTROL (AVIM)
(Continued)
11-63
11.
Support large end of link (23). Drive out lower
bearing (26) and spacer (27). Use pin punch.
12.
Turn link (23) over and install in arbor press.
Press out bearing (28). Remove link from arbor
press.
13.
Remove cotter pin (29), nut (30), clip (10),
washer (31), and bolt (32). Remove fitting (33)
from shaft (11).
11-288
