TM 55-1520-240-23-3
4-113
INSTALL AND RIG GAS PRODUCER CONTROL LINKAGE
(Continued)
4-113
11.
Check index mark (13) on actuator shaft (1).
Index mark shall align with index mark (14) on
bracket (15) within one tooth on spline (16).
INSPECT
12.
Install bolt (17) and washer (18) in lever (19).
13.
Slide lever (19) on shaft (1). Index mark (20) on
lever shall align with index mark (14).
14.
Install washer (21) and nut (22) on shaft (1).
Torque nut to 35 inch-pounds.
4-402
