TM 55-1520-240-23-3
4-112
REMOVE GAS PRODUCER CONTROL LINKAGE
(Continued)
4-112
NOTE
If special washers are not bonded to
lever at removal, secure them to lever
with twine.
4.
Remove nut (10) and washer (11) from actuator
shafts (12). Slide and remove lever (4) from
shafts. Remove bolts (13) and washer (14) from
lever.
5.
Remove cotter pin (16), nut (17), two washers
(18), and bolt (19). Slide and remove lever (8)
from shaft (20). Remove bolt (21) and washer
(22) from lever.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-398