TM 55-1520-240-23-9
11-90.1
REPLACE INSERTS IN CONTROL PALLET STA 95 AND STA 120 (AVIM)
11-90.1
INITIAL SETUP
Applicable Configurations:
All
Tools:
Airframe Repairer’s Tool Kit, NSN 5180-00-323-4876
Vacuum Cleaner
Explosion-Proof Heat Lamp
Hypodermic Injector
Counterbore Set, NSN 5133-00-378-3813
Portable Drill, NSN 5130-00-293-1978
Drill Press
Drill Bit, 3/4 Inch
Drill Bit, 11/16 Inch
Drill Bit, No. 43
C-Clamps
Wood Blocks, 2 x 2 X 0.5 Inch (2)
Aligning Tool NAS1837G7 or NAS1837G9
Trip Balance, NSN 6670-00-401-7195
Materials:
Adhesive (E40 or E41)
Acetone (E20)
Methyl-Ethyl-Ketone (E244)
Gloves (E184.1)
Polyethylene Cup (E157)
Wood Spatula (E424)
Temperature Indicating Strips (E413)
Cloths (E120)
Abrasive Paper (E7)
Epoxy Primer (E292.11)
Parts:
Inserts
NAS1835A3M
NAS1835A4M
NAS1834A3-1122
Installation Tabs
NAS1837T7
NAS1837T9
Personnel Required:
Aircraft Structure Repairer
Inspector
Equipment Condition:
Off Helicopter Task
General Safety Instructions:
Methyl-ethyl-ketone (E244) is
flammable and toxic. Use only with
adequate ventilation. Keep away
from heat, sparks, or open flame. Do
not inhale. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Acetone (E20) is extremely flammable.
It can be toxic. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
Keep away from heat, sparks, or open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
11-483
