TM 55-1520-240-23-9
11-82
INSTALL COPILOT’S COCKPIT CONTROL ASSEMBLY
(Continued)
11-82
INSTALL YAW CONNECTING LINK
64.
Move bellcrank (97) for access to bolt (98).
Remove nut (99), two washers (100 and 101)
and bolt.
65.
Slide yaw connecting link (102) to left into
position in bellcrank (97).
66.
Install bolt (98), two washers (101 and 100) and
nut (99) in bellcrank (97). Remove tag from link
(102).
67.
Move bellcrank (40) for access to bolt (103).
Remove nut (104) two washers (105 and 106)
and bolt.
68.
Position link (102) in bellcrank (40).
69.
Install bolt (103), two washers (106 and 105) and
nut (104) in bellcrank (40).
70.
Torque nuts (99 and 104) to 30 to 60
inch-pounds. Install two cotter pins (107 and
108).
71.
Check bolts (98 and 103). Bolts shall not rotate
with torque less than 10 inch-pounds. There
shall be no axial looseness. If bolt rotates or is
loose, add washer under nut and repeat step 70.
72.
Connect two BRAKE hoses (109) to nipple (110)
and elbow (111) of cylinders (112 and 113).
Remove tags.
73.
Connect two PRESS hoses (114) to nipple (115)
and elbow (116) of cylinders (112 and 113).
Remove tags.
74.
Connect two RET hoses (117) to nipple (118)
and elbow (119) of cylinders (112 and 113).
Remove tags.
75.
Install copilot’s control stick (Task 11-72).
76.
Perform neutral rig check (Task 11-33).
11-435
