TM 55-1520-240-23-9
11-82
INSTALL COPILOTS COCKPIT CONTROL ASSEMBLY
11-82
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 150 Inch-Pounds
Materials:
Acetone (E20)
Cloths (E120)
Sealant (E336)
Gloves (E186)
Parts:
Gasket
Cotter Pins
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
References:
TM 55-1520-240-23P
Task 1-13
Task 11-33
Task 11-72
INSTALL CONTROL ASSEMBLY
Control assembly weighs about 50
pounds. Do not drop assembly;
otherwise, injury to personnel or
damage to equipment could occur.
1.
With aid from helper, position control assembly
(1) about 6 inches forward in floor recess (2).
2.
Lift forward end (3) about 6 inches and tilt left
side (4) down into recess (2). Move assembly
(1) aft and lower forward end. Align assembly
in recess.
3.
Install four washers (5) and bolts (6).
11-429