TM 55-1520-240-23-7
8-103
REMOVE PILOTS INSTRUMENT PANEL
(Continued)
8-103
3.
Disconnect five wires (6) from TB2 (7). Use
contact insertion/removal tool.
4.
Remove five wires (6) from wire harness (8).
5.
Remove module directly above each nut (9). Use
module extraction tool. Remove two screws (10),
nuts (9), and TB2 (7).
6.
Remove four screws (11) from four clamps (12).
7.
Move wire harness (8) away from panel (1).
NOTE
Helicopters without 17 have three
light fixtures. Helicopters with
17 have four light fixtures.
8.
Remove two screws (13) from each light fixture
(14). Remove fixture by cutting wire (14.1) and
pulling end through panel (1). Tag fixture.
9.
Remove each of two switches (15) by removing
nut (16) and washer (17). Push switch through
instrument panel (1).
10.
With 17 , remove screw (17.1), nut (17.2), and
filter cap (17.3).
11.
Remove light (18) from two clips (19). Remove
two screws (20) and two clips from panel (1).
8-332