TM 55-1520-240-23-7
8-104
INSTALL PILOTS INSTRUMENT PANEL
(Continued)
8-104
9.
Position washer (26) and nut (27) on wire (28).
10.
Thread wire (28) through tube (29) and slide tube
through panel (1) into clamps (30).
11.
Install washer (26) and nut (27) on tube (29).
Tighten screws (31) on clamps (30).
12.
Install nut (32) and knob (33) on wire (28).
13.
Position two clips (34) on panel (1). Install two
screws (35). Install light (36) between two clips.
Make sure light plugs into socket (37).
13.1.
With 17 , position filter cap (37.1) on panel (1).
Install screw (37.2) and nut (37.3).
NOTE
Helicopters without 17
have
three light fixtures on pilots panel.
Helicopters with 17 have four light
fixtures.
13.2.
Install each light fixture (37.4) by threading wire
(37.5) through hole in panel (1). Install two
screws (37.6). Splice wire behind panel (TM
55-1500-323-25).
14.
Position each of two switches (38) in panel (1).
Install washer (39) and nut (40).
8-337