TM 55-1520-240-23-7
8-102
INSTALL HYDRAULIC MAINTENANCE PANEL
8-102
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Materials:
Cloth (E120)
Dry Cleaning Solvent (E162)
Gloves (E186)
Personnel Required:
Aircraft Electrician
Medium Helicopter Repairer
Inspector
References:
TM 55-1520-240-23P
TM 55-1500-323-25
General Safety Instructions:
Dry cleaning solvent (E162) is
combustible and toxic. It can irritate
skin and cause burns. Use only with
adequate ventilation, away from open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
1.
Clean bonding surfaces of maintenance panel
(1). Use gloves (E186) and cloths (E120) (TM
55-1500-323-25).
2.
Position maintenance panel (1). Have helper
hold panel in position.
3.
Install six screws (3) and washers (4).
4.
Connect two wire harness connectors (6).
Remove tags.
INSPECT
FOLLOW-ON MAINTENANCE:
Operational check of system (TM 55-1520-240-T).
END OF TASK
8-330
