TM 55-1520-240-23-7
8-104
INSTALL PILOT’S INSTRUMENT PANEL
(Continued)
8-104
2.
Position rheostat (5) in panel (1). Install washer
(6) and nut (7) on rheostat. Remove tape and
connect three wires (8) to rheostat (5). Remove
tags.
3.
Position socket (9) in panel (1). Install washer
(10) and nut (11) on socket.
4.
Remove tape and connect wire (12) to socket
(9). Tighten screw (13).
5.
Position panel (14 or 14.1). Install two screws
(15).
6.
Without 17 , install lamp (16) and lens (17) in
socket (9).
7.
Turn rheostat shaft (18) to left. Position knob (19)
on shaft (18) so pointer (20) is on DIM. Tighten
two setscrews (21).
8.
Position pad (22) on panel (1). Install 7 screws
(23), 14 washers (24), and 7 nuts (25).
8-336
