TM 55-1520-240-23-6
7-19
ASSEMBLE FILL MODULE (AVIM)
(Continued)
7-19
ASSEMBLE RESERVOIR
1.
Install packing (1) on sight plug (2).
2.
Install plug (2) in base (3).
3.
Install packing (4) in base (3).
4.
Position barrel (5) on base (3). Align slots (6) in
barrel with thread holes (7) in base.
5.
Install four retainers (8) and screws (9). Screws
are self-locking. If screws turn freely, replace
screws.
6.
Install packing (10) in housing (11).
7.
Position housing (11) on barrel (5). Align housing
with cover (12) opening 90º to sight plug (2) as
shown.
8.
Install four screws (13) in barrel (5). Use 7/64
inch socket key.
9.
Close cover (12). Install two springs (14).
10.
Open cover (12). Install filter (15) and ring (16) in
housing (11).
11.
Install packing (17) in cover (12).
ASSEMBLE PUMP
12.
Install packing (18) on seat (19).
13.
Install spring (20), ball (21), and seat (19) in
housing (22).
14.
Install packing (23) on plug (24).
15.
Install plug (24) in housing (22).
7-141
