TM 55-1520-240-23-6
7-18
DISASSEMBLE AND INSPECT FILL MODULE (AVIM)
(Continued)
7-18
34.
Install housing (10) in vise (33).
35.
Remove plug (47) from housing (10).
36.
Remove packing (48) from plug (47).
37.
Remove seat (49), ball (50), and spring (51) from
housing (10).
37.1.
Inspect ball (50) and mating surface of seat (49).
There shall be no nicks, scratches, or other
visible damage.
38.
Remove packing (52) from seat (49).
39.
Remove housing (10) from vise (33).
DISASSEMBLE RESERVOIR
40.
Close cover (53). Remove two springs (54).
41.
Open cover (53). Remove packing (55) from
cover.
42.
Remove ring (56) and filter (57) from housing
(58). Use retaining ring pliers. Check that filter
has no holes or tears.
43.
Remove four screws (59) from reservoir barrel
(60). Use 7/64 inch socket key.
44.
Remove housing (58) and cover (53) from barrel
(60).
45.
Remove packing (61) from housing (58).
46.
Remove four screws (62) and retainers (63) from
base (64).
47.
Remove barrel (60) and packing (65) from base
(64).
48.
Remove sight plug (66) from base (64).
49.
Remove packing (67) from plug (66).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-139
