TM 55-1520-240-23-6
7-18
DISASSEMBLE AND INSPECT FILL MODULE (AVIM)
(Continued)
7-18
DISASSEMBLE SELECTOR VALVE
5.
Remove lockwire and remove three screws (12).
6.
Remove valve (13) from housing (10).
7.
Remove transfer tube (14) from valve (13) or
housing (10). Remove two packings (15) from
transfer tube.
8.
Remove lockwire from screw (16).
9.
Press handle (17) towards valve (13) and remove
screw (16).
10.
Slide handle (17) from valve (13). Remove ball
(18) and spring (19) from handle. Remove shim
(19.1) (if installed).
11.
Remove four screws (20) from valve (13).
12.
Work and remove cover (21) and rotor (22) from
valve (13).
7-136
