TM 55-1520-240-23-6
7-19
ASSEMBLE FILL MODULE (AVIM)
(Continued)
7-19
29.
Install two packings (42) on transfer tube (43).
30.
Install transfer tube (43) in base (3).
31.
Position housing (22) over transfer tube (43).
32.
Install two screws (44).
33.
Lockwire two screws (44) to plug (24). Use
lockwire (E230).
34.
Install screw (45).
35.
Lockwire screw (45) to gage (2). Use lockwire
(E230).
ASSEMBLE SELECTOR VALVE
36.
Install three packings (46) on seals (47).
NOTE
Correct number of shims is
determined during testing (Task 7-20).
37.
Install shims (47.1), three springs (48) and seals
(47) in valve (49), with thin lip of seals outboard.
38.
Install packing (50) on cover (51).
39.
Install washer (52) and packing (53) on rotor (54).
40.
Install rotor (54) in cover (51). Align hole (55) in
rotor with slot (56) in cover.
7-143
