ASSEMBLE FILL MODULE (AVIM) (Continued)

ASSEMBLE FILL MODULE (AVIM) (Continued) - TM-55-1520-240-23-6_159

ASSEMBLE FILL MODULE (AVIM) (Continued) - TM-55-1520-240-23-6_161

TM-55-1520-240-23-6 CH-47D Heilcopter Manual
Page Navigation
141

TM 55-1520-240-23-6 7-19 ASSEMBLE FILL MODULE (AVIM) (Continued) 7-19 41. Install cover (51) in valve (49), with slot (56) facing valve side (57). 42. Install four screws (58). Screws are self-locking. If screws turn freely, replace screws. NOTE Correct number of shims is determined during testing (Task 7-20). 43. Install shims (58.1), spring (59) and ball (60) in handle (61). 44. Slide handle (61) on shaft (62). Align holes (63) in handle with hole in slot (56). Press handle towards valve (49) to expose hole in slot. 45. Install screw (64) in handle (61). 46. Lockwire screw (64) to handle (61). Use lockwire (E227). 47. Install two packings (65) on transfer tube (66). 48. Install housing (22) in vise (27). Install transfer tube (66) in housing (22). 49. Slide valve (49) over transfer tube (66). 50. Install two screws (67) and screw (68). 51. Lockwire two screws (67). Use lockwire (E230). 52. Lockwire screw (68) to valve (49). Use lockwire (E230). Remove housing (22) from vise (27). 7-144

Privacy Statement
Press Release
Contact