TM 55-1520-240-23-4
5-81.2
REPAIR KEVLAR SHOCK ABSORBER BRACKET WINDINGS MINOR
DAMAGE
(Continued)
5-81.2
Acetone (E20) is extremely flammable.
It can be toxic. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
Keep away from heat, sparks, or open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
3.
Wipe damage area (1) clean. Use cloth (E120)
damp with acetone (E20). Wear gloves (E186).
Wipe dry with clean cloth before acetone
evaporates.
INSPECT
Adhesive (E40 or E41) is toxic. It can
irritate skin and cause burns. Avoid
inhaling. Use only with adequate
ventilation. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
NOTE
Prepackaged adhesive (E40) is
preferred. Use adhesive (E41, E43,
or E47.1) only if prepackaged kit is
not available.
4.
Mix tube of adhesive (E40). Follow instructions
on kit.
5.
If adhesive (E40) is not available, prepare
adhesive (E41) as follows:
a.
Weigh 100 parts of resin and 23 parts of
hardener. Use trip balance.
b.
Mix parts in polyethylene cup (E157) until
color is uniform. Use wood spatula (E424).
NOTE
Working life of adhesive is 30
minutes.
5-467