TM 55-1520-240-23-4
5-81.2.1
REPAIR KEVLAR SHOCK ABSORBER BRACKET WINDING FILLER
MATERIAL-CRACKS/VOIDS
(Continued)
5-81.2.1
Acetone (E20) is extremely flammable.
It can be toxic. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
Keep away from heat, sparks, or open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
4.
Flush cracks or voids (1) with acetone (E20).
Use squeeze bottle (E366). Wear gloves (E186).
Dry with compressed air.
Sealant (E342.1) is toxic. It can
irritate skin and cause burns. Avoid
inhaling. Use only with adequate
ventilation. Avoid contact with skin,
eyes, or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
5.
If width of crack precludes insertion of a
hypodermic syringe, apply 1/8- to 3/16 inch layer
of sealant (E342.1) to exposed filler material.
Fair sealant into surrounding surface.
6.
Cure sealant at 70ºF (21ºC) for 6 hours.
Resin (E313.1) or curing agent
(E158.1) is toxic. It can irritate skin
and cause burns. Avoid inhaling. Use
only with adequate ventilation. Avoid
contact with skin, eyes, or clothing.
In case of contact, immediately flush
skin or eyes with water for at least
15 minutes. Get medical attention
for eyes.
7.
If a crack (1) will accept a hypodermic syringe
(E380) prepare the following mixture.
a.
Weigh 100 parts of resin (E313.1) and 50
parts of curing agent (E158.1).
5-471
