TM 55-1520-240-23-4
5-81.2
REPAIR KEVLAR SHOCK ABSORBER BRACKET WINDINGS — MINOR
DAMAGE
(Continued)
5-81.2
5.1.
If adhesive (E43) is used, prepare as follows:
a.
Weigh 7 parts of gray hardener and 5 parts
of white base. Use trip balance.
b.
Mix parts in polyethylene cup (E157) until
color is uniform. Use wood spatula (E424).
5.2.
If adhesive (E47.1) is used, prepare as follows:
a.
Weigh equal parts of adhesive (E47.1) and
curing agent (E158.1). Use trip balance.
b.
Mix parts in polyethylene cup (E157) until
color is uniform. Use wood spatula (E424).
6.
Fill damage area (1) with adhesive (E40, E41,
E43 or E47.1). Smooth adhesive until it is level
with surface. Make sure all loose fibers are
turned into repair area.
7.
Cover damage area (1) with peel ply (E270) (2) 1
inch larger, on all sides, than damage area.
8.
Cover peel ply (E270) (2) with Teflon-impregnated
fabric (E170) (3) of the same size.
9.
Secure peel ply (E270) (2) and
Teflon-impregnated fabric (E170) (3).
Use tape (E387) (4).
5-468
