TM 55-1520-240-23-4
5-81.1
REPLACE SHOCK ABSORBER BRACKET BUSHINGS
5-81.1
INITIAL SETUP
Applicable Configurations:
All
Tools:
Powertrain Repairer’s Tool Kit, NSN
5180-01-375-6928
Shock Absorber Bracket Bushing Puller/Pusher (T98)
Repair Kit, Lag Dampner Bracket, Oversized
Bushings (T187)
Materials:
Acetone (E20)
Cloth, Cleaning (E120)
Epoxy Primer (E292.1)
Gloves (E184.1)
Kevlar Gloves (E187)
Dry Ice (E92)
Methanol (E243)
Goggles (E473)
Personnel Required:
Aircraft Powertrain Repairer
Inspector
References:
TM 55-1520-240-23
Task 5-82
Equipment Condition:
Off Helicopter Task
General Safety Instructions:
WARNING
Acetone (E20) and epoxy primer
(E292.1) are flammable and toxic.
Good general ventilation is normally
adequate. Skin and eye protection is
required. Avoid all sources of ignition.
WARNING
Dry ice (E92) in methanol (E243) has
a temperature of -120 F (-84 C).
Observe all safety measures when
working with dry ice and methanol
and when handing chilled parts. Avoid
breathing carbon dioxide vapor.
5-458
Change 2
