TM 55-1520-240-23-3
4-74.1
REMOVE ENGINE AIR INLET FAIRING
(Continued)
4-74.1
12.
Connect hoist (34) to eye (30) of sling (24).
13.
Remove lockwire from two bolts (35) on two
forward engine mount caps (36). Loosen bolts
and push down to side.
14.
Have helpers hold engine to prevent unnecessary
movement.
15.
Raise hoist (37) slowly to remove slack from
sling (24).
16.
Remove nut (38), washers (39), and bolt (40)
from lower end of aft engine mount link (41).
Do not lift powerplant more than 1
inch. Connecting hoses and wires
might be damaged.
17.
Continue to raise hoist (37) slowly until forward
adapters (42) are lifted about 1 inch above caps
(36).
18.
Move fairing (22) forward and over engine
transmission (43).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
4-319
