TM 55-1520-240-23-3
4-75
INSTALL ENGINE AIR INLET FAIRING
(Continued)
4-75
5.5.
Remove sling (12.11) as follows:
a.
Remove pin (12.12) from bar (12.13).
b.
Remove cable (12.14) from aft fitting (12.15).
c.
Remove two cables (12.16) from forward
fittings (12.13).
d.
Remove sling (12.11) from hoist (12.1).
5.6.
Open access cover (12.17) (Task 4-49).
5.7.
Position coupling (13) around fairing (1) with
clamp (14) outboard, mid-position.
5.8.
Push clamp (14) down to secure coupling (13).
Lockwire clamp. Use lockwire (E231).
4-322