TM 55-1520-240-23-3
4-74.1
REMOVE ENGINE AIR INLET FAIRING
(Continued)
4-74.1
4.
Remove four clamps (8), secured by three
screws (9) and nuts (10). Use masking tape
(E388) to make clamp locations.
5.
Remove screw (11), washer (12), and nut (13)
from bonding wire (14).
6.
Disconnect two fittings (15) from water wash
tubing (16).
7.
Remove two packings (17) from two fittings (15).
Discard packings (17).
4-317
