TM 55-1520-240-23-3
4-74.1
REMOVE ENGINE AIR INLET FAIRING
(Continued)
4-74.1
8.
Loosen nut (18) on clamp (19) until lever (20)
can be lifted to release coupling (21).
9.
Remove coupling (21) from fairing (22).
10.
Close engine upper access cover (23) (Task
4-62).
11.
Install sling (24) as follows:
a.
Open access door (25) in engine access
cover (23).
b.
Connect two cables (26) to forward fittings
(27).
c.
Connect cable (28) into aft fitting (29) through
cover (23).
d.
Adjust sling (24) until eye (30) is over center
hole (31) in sling bar (32).
e.
Install pin (33) through bar (32).
4-318
