TM 55-1520-240-23-10
16-111
REPLACE EAPS ELECTRICAL CABLE
16-111
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 6625-00-556-4915
Personnel Required:
Aircraft Electrician
Inspector
Equipment Condition:
EAPS Removed (Task 16-109)
Off Helicopter Task
1.
Remove three bolts (1), five washers (2), and
cable guard (3).
2.
Remove washers (7), screws (8), and cable
clamps (4).
3.
Disconnect three connector plugs (6) and remove
cable (5) from EAPS.
4.
Install new cable (5) on EAPS and connect three
connector plugs (4).
5.
Install cable clamps (4) and cable guard (3).
INSPECT
FOLLOW-ON MAINTENANCE
Install EAPS (Task 16-110).
END OF TASK
16-372