REMOVE ENGINE AIR PARTICLE SEPERATOR (EAPS) (Continued)

TM-55-1520-240-23-10 UH-1H/V and EH-1H Aircraft Manual
Page Navigation
771

TM 55-1520-240-23-10 16-109 REMOVE ENGINE AIR PARTICLE SEPERATOR (EAPS) (Continued) 16-109 Use protective equipment to protect eyes and face when you use compressed air. Maximum permitted air pressure is 30 psi (207 KPA). Do not point compressed air toward yourself or other persons. Do not use solvents to clean the EAPS or its components. Solvents can cause serious damage to inlet swirl tubes, seals, electrical parts, and fiberglass items. 16. Remove grease, oil, or other contaminants from exterior surfaces using a clean wiping cloth (E120) (damp) with a detergent soap (E159.1) and water. 17. Dry cleaned area using compressed air. 18. Remove debris from inlet swirl tubes (from exterior side) using a vacuum cleaner. FOLLOW-ON-MAINTENANCE: As Required END OF TASK 16-367

Privacy Statement
Press Release
Contact