TM 55-1520-240-23-10
16-110
INSTALL ENGINE AIR PARTICLE SEPERATOR
16-110
INITIAL SETUP
Applicable Configurations:
All
Tools:
Hoist
EAPS Lifting Device (T188)
Guide Ropes (2)
Mechanic’s Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 150 Inch-Pounds
Personnel Required:
Medium Helicopter Repairer (3)
Inspector
1.
Remove quick release pins (12) from hook
latch (13) and pin latch (14), bring handles to
a fully open position and secure. Also, secure
quick release pins (12) and lanyards away from
mounting feet to prevent them from snagging
during EAPS installation.
2.
Install lower cross shaft seal (15) under cross
shaft fairing with P-seal facing outboard. Position
as far inboard as possible.
16-368
