TM 55-1520-240-23-10
16-113
REMOVAL OF EAPS SLIDE BEARINGS/BLOCKS
16-113
INITIAL SETUP
Applicable Configurations:
All
Tools:
Mechanic’s Tool Kit, NSN 5180-00-323-4692
Personnel Required:
Medium Helicopter Repairer
Equipment Condition:
EAPS Removed (Task 16-109)
FORWARD
OUTBOARD
1.
Remove four bolts (6) and washers (7) from
forward outboard slide block (5).
2.
Remove slide block (5), slide bearing (8) and
stainless steel washer (9). Discard slide bearing
(8).
INBOARD
3.
Remove four bolts (6) and washers (7) from
forward inboard slide block (10).
4.
Remove slide block (10), shim (12) (if installed)
and slide bearing (8). Discard slide bearing (8).
AFT
OUTBOARD
5.
Remove two nuts (13) and washers (14) from aft
outboard slide block (15).
6.
Remove and discard slide block assembly (15).
INBOARD
7.
Remove two bolts (6) and washers (7) from aft
inboard slide block (16).
8.
Remove and discard slide block assembly (16).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
16-374
