TM 55-1520-240-23-10
16-112
REPLACE OF EAPS MOUNTING FEET
16-112
INITIAL SETUP
Applicable Configurations:
All
Tools:
Mechanic’s Tool Kit, NSN 5180-00-323-4692
Torque Wrench, 30 to 200 Inch-Pounds
Personnel Required:
Medium Helicopter Repairer (2)
Inspector
Equipment Condition:
Remove EAPS (Task 16-109)
1.
Remove four screws (1) and washers (2) from
each mounting foot (4).
2.
Remove mounting foot (4) and shims (3), if
installed. Keep shims (3) with corresponding
mounting foot for reinstallation.
3.
Install shims (3) (if applicable), mounting feet (4),
screws (1), and washers (2). Torque fourteen
1/4 inch screws to 90 to 100 inch-pounds.
Torque two 5/16 inch screws (11) to 135-165
inch-pounds.
INSPECT
FOLLOW-ON MAINTENANCE:
Install EAPS (Task 16-110).
END OF TASK
16-373
