TM 55-1520-240-23-10
16-106
INSTALL EAPS CONTROL BOX
16-106
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairer’s Tool Kit, NSN 5180-00-323-4915
Materials:
None
Personnel Required:
Aircraft Electrician
References:
TM 55-1520-240-23P
TM 55-1520-240-T
NOTE
No. 1 control box shown. Procedure
to install No. 2 control box is similar.
1.
Remove cover (4) if installed. Position control
box (2) on structure (7) and secure with four
screws (5) and washers (6).
2.
Connect two electrical connectors (1) to the
control box (2).
3.
Install cover (4) and secure six fasteners (3).
4.
Perform operational check of system. (Refer to
TM 55-1520-240-T.)
FOLLOW-ON MAINTENANCE:
As Required
END OF TASK
16-362
