REPLACE TIP END CAP
Naphtha (E245) is combustible and
toxic. It can irritate skin and cause
burns. Use only with adequate
ventilation, away from open flame.
Avoid contact with skin, eyes,
or clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
Clean thread of replacement end caps (1 and 2).
Use clean cloth (E120) saturated with naphtha
(E245). Wipe dry with clean cloth.
Remove tape (4) from weight tube (3).
Apply antiseize compound (E76) to thread of
tip end caps (1 and 2). Screw caps into each
set of weight tubes (3). Torque to 200 to 250
Install tip cover (Task 5-74).
Close work platforms (Task 2-2).
Remove blade tiedown lines (Task 1-26).
END OF TASK