TM 55-1520-240-23-9
11-19
REMOVE DAMAGED RIG PIN FROM FIRST STAGE CONTROLS
11-19
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanics Tool Kit, NSN 5180-00-323-4692
Aluminum Drift Pin, 3/8 Inch Diameter
Hacksaw
Rigging Pin A, First Stage Mixing Linkage (T44)
Materials:
None
Personnel Required:
Medium Helicopter Repairer
Inspector
References:
Task 11-18
Task 11-51
Task 11-188
Task 11-189
Equipment Condition:
Battery Connected (Task 1-39)
Electrical Power On
Hydraulic Power On
Servocylinder Safety Blocks (T31) Installed (Task
11-28)
Forward and Aft Servocylinder Connecting Links
Disconnected (Task 11-192)
Copilots Cockpit Controls at Neutral (Task 11-32)
Forward Transmission Drip Pan Removed (Task 2-3)
Forward Left Work Platform Open (Task 2-2)
11-76