TM 55-1520-240-23-9
11-220
INSTALL LCT ACTUATOR END FITTING BEARING (AVIM)
11-220
INITIAL SETUP
Applicable Configurations:
All
Tools:
Aircraft Mechanic’s Tool Kit, NSN 5180-00-323-4692
Arbor Press
Drill Press
Roller Staking Kit, NSN 5120-00-311-5446
Container, 2 Quart
Materials:
Corrosion Preventive Compound (E153)
Carbon Dioxide (Dry Ice) (E92)
Methanol (E243)
Cleaning Cloth (E120)
Gloves (E186)
Kevlar Gloves (E187)
Personnel Required:
Medium Helicopter Repairer
Inspector
Machinist
References:
TM 55-520-240-23P
TM 55-1500-322-24
Corrosion preventive compound
(E153) is flammable and toxic. It can
irritate skin and cause burns. Use only
in well-ventilated area, away from heat
and open flame. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
NOTE
Procedure is same to install bearing in
forward LCT actuator (145CS114-1)
or aft LCT actuator (145CS114-2).
Bearing (114HS662-1) is used for
actuator (145CS114-1).
Bearing (114CS124-1) is used for
actuator (145CS114-2).
1.
Coat bore (1) with corrosion preventive
compound (E153). Wear gloves (E186).
11-863
