TM 55-1520-240-23-9
11-190
REMOVE SECOND STAGE MIXING ASSEMBLY
(Continued)
11-190
REMOVE PITCH AND THRUST OUTPUT LINK
7.
Tag pitch and thrust output link (33). Remove
cotter pin (34), nut (35), washers (36), and bolt
(37) from aft output bellcrank (38). Disconnect
link from bellcrank. Install bolt, washers, and nut
in bellcrank.
8.
Remove cotter pin (39), nut (40), washers (41),
and bolt (42) from bellcrank (43). Remove link
(33). Install bolt, washers, and nut in bellcrank.
DISCONNECT FORWARD TUNNEL LEFT AND RIGHT
CONNECTING LINKS
9.
Tag forward tunnel left connecting link (44).
Remove cotter pin (45), nut (46), washers (47),
and bolt (48) from bellcrank (38). Disconnect
link from bellcrank. Install bolt, washers, and nut
in bellcrank.
10.
Tag forward tunnel right connecting link (49).
Remove cotter pin (50), nut (51), washers (52),
and bolt (53) from bellcrank (38). Disconnect
link from bellcrank. Install bolt, washers, and nut
in bellcrank.
DISCONNECT UPPER INBOARD LINK
11.
Tag upper inboard link (54). Move bellcrank (22)
for access to bolt (55). Remove cotter pin (56),
nut (57), washers (58), and bolt. Disconnect link
from bellcrank. Install bolt, washers, and nut in
bellcrank.
11-765
