TM 55-1520-240-23-9
11-190
REMOVE SECOND STAGE MIXING ASSEMBLY
(Continued)
11-190
REMOVE AFT INPUT AND SUPPORT BELLCRANKS
20.
Remove cotter pin (94) from shaft (95). Loosen
nut (96) four turns. Use 1-1/2 inch wrench.
21.
Remove cotter pin (97), nut (98), washers (99),
and bolt (100) from fitting (101).
22.
Pull shaft (96) 1 inch from support (102). If shaft
will not tighten nut (96) to lift shaft.
23.
Pull up shaft (95) to release spacer (103)
between fitting (101) and bellcrank (70). Remove
spacer.
24.
Tag aft support bellcrank (70) and aft input
bellcrank (43).
25.
Have helper hold bellcrank (43 and 70) in
position. Pull up shaft (95) to release bellcrank
(43). Remove bellcrank. Slide bellcrank aft.
26.
Slide bellcrank (70) down from bushing (104).
Remove bellcrank.
11-768