TM 55-1520-240-23-9
11-190
REMOVE SECOND STAGE MIXING ASSEMBLY
(Continued)
11-190
REMOVE FORWARD INPUT AND SUPPORT
BELLCRANKS
27.
Tag forward input bellcrank (22) and forward
support bellcrank (64).
28.
Have helper hold bellcranks (22 and 64) in
position. Pull up shaft (95) to release bellcrank
(22). Remove bellcrank. Slide bellcrank aft.
29.
Pull shaft (95) from bellcrank (64) and support
(102). Remove shaft (95).
30.
Have helper hold bellcrank (64) in position.
Remove bushing (105) from bellcrank (64) and
support (106). Tag bushing.
31.
Remove bushing (107) from bellcrank (64) and
support (102). Remove bellcrank (64). Tag
bushing.
REMOVE STOP TUBES
32.
Remove two nuts (108), two bolts (108.1) and
eight washers (108.2) from plate (109). Remove
screw (110), bolt (110.1) and washer (110.2).
Remove two bolts (111) and washers (111.1).
Remove plate (109) from support (102).
11-769
