TM 55-1520-240-23-9
11-189
INSTALL FIRST STAGE MIXING ASSEMBLY
(Continued)
11-189
64.
Check bolts (17, 22, 27, 33, 38, 43, 48, 53, 57,
62, 66, 71, 76, and 81). Bolts shall not rotate
with torque less than 10 inch-pounds. There
shall be no axial looseness. If bolt rotates or is
loose, add washer under nut. Torque nut and
cotter pin again.
INSPECT
FOLLOW-ON MAINTENANCE:
Connect forward and aft connecting links to
servocylinders (Task 11-193).
Install forward left connecting link (Task 11-195).
Remove safety blocks (Task 11-29).
Perform neutral rig check (Task 11-33).
Perform operational check of flight controls (TM
55-1520-240-T).
Install forward transmission inlet duct (Task 6-122).
Install forward transmission drip pan (Task 2-3).
Close work platforms (Task 2-2).
Close control closet access panel (Task 2-2).
Install avionics compartment acoustical blanket (Task
2-108).
Install receiver/transmitter RT-1220/ALQ156 (TM
11-1520-240-20).
END OF TASK
11-762
