TM 55-1520-240-23-7
9-74
ASSEMBLE LANDING LIGHT MOTOR (AVIM)
(Continued)
9-74
8.
Connect capacitor (14) across terminals (11).
Do not solder.
9.
Position insulator (15) inside cover (16). Install
insulator and cover on motor (7).
10.
Install grommet (17) in opening at end of cover
(15).
NOTE
Connect wiring that was disconnected
during disassembly as tagged.
11.
Solder motor wires and capacitor (14) to
terminals (11). Use solder (E360). Remove tags.
12.
Solder two shields to terminal (6). Use solder
(E360). Remove tags.
13.
Guide motor filter wires (18) through grommet
(17).
INSPECT
14.
Position insulator (19), cap (20), and plate (21)
on motor (22). Install two screws (23) and
washers (24).
15.
Position filter (25) on plate (21). Install two
screws (28) and washers (27).
16.
Install worm gear (28) and two setscrews (29).
17.
Solder two wires (18) to filter terminals (30). Use
solder (E360). Remove tags.
9-249
