TM 55-1520-240-23-7
9-75
ASSEMBLE LANDING LIGHT ROTATING MECHANISM (AVIM)
(Continued)
9-75
16.
Guide wire harness (43) through hole in casting
(16) and through clamp (30). Position motor
(44) on casting and install two screws (45) and
washers (46).
17.
Solder two wires (47) to switch (38). Use solder
(E360). Remove tags.
18.
Remove screw (9) and washer (10). Position
electrical lead (48) to top of shaft (2). Install
screw (9) and washer (10). Remove tag.
9-253
