TM 55-1520-240-23-7
9-75
ASSEMBLE LANDING LIGHT ROTATING MECHANISM (AVIM)
(Continued)
9-75
19.
Install screw (49) through actuator nut (50) on
actuator (51). Install button (52) as shown.
20.
Position actuator (51) on sector gear (53). Install
two screws (54) and washers (55).
21.
Position sector gear (53) on rotating mechanism
(56). Install two screws (57) and washers (58).
Acetone (E20) can form toxic
vapors if exposed to flame. Use in
well-ventilated area, away from open
flame. In case of contact, immediately
flush skin or eyes with water for
at least 15 minutes. Get medical
attention for eyes.
22.
Clean mating surfaces of cover (59) and rotating
mechanism (56). Use cloths (E120) and acetone
(E20). Use gloves (E186).
23.
Install cover (59), two screws (60) and washers
(61).
24.
Install cover (62) using two screws (63).
Sealant (E336) can irritate skin and
cause burns. Avoid contact with skin,
eyes, and clothing. In case of contact,
immediately flush skin or eyes with
water for at least 15 minutes. Get
medical attention for eyes.
25.
Seal outer edges of cover (59). Use sealant
(E336). Use gloves (E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
9-254
