TM 55-1520-240-23-7
9-74
ASSEMBLE LANDING LIGHT MOTOR (AVIM)
9-74
INITIAL SETUP
Applicable Configurations:
All
Tools:
Electrical Repairers Tool Kit, NSN 5180-00-323-4915
Soldering Gun
Materials:
Acetone (E20)
Sealant (E336)
Solder (E360)
Cloths (E120)
Gloves (E186)
Personnel Required:
Aircraft Electrician (2)
Inspector
References:
TM 55-1520-240-23P
1.
Install two springs (1) in holders (2).
2.
Install two brushes (3) in holders (2).
3.
Guide brush wires (4) through spring slots in
brush and spring holders (2). Chamfer on brush
(3) shall face away from brush spring (1).
4.
Solder two wires (4) to ends of posts (5) on
holders (2). Use solder (E360).
5.
Install terminal (6) on motor (7). Install screw
(8) and washer (9).
6.
Position two holders (2) and insulators (10) on
motor (7).
7.
Install two terminals (11), washers (12), and
washers (13).
9-248