TM 55-1520-240-23-6
7-267
DISASSEMBLE AND INSPECT 114HS111 RAMP CONTROL VALVE (AVIM)
(Continued)
7-267
15.
Remove nine rollers (25) and space plate (26)
from plate (27).
16.
Remove valve cap (24) from guide shaft (28).
17.
Remove packing (29) and retainer (30) from
valve cap (24).
17.1.
Inspect bore of valve cap (24). Bore shall have
no nicks or scratches.
17.2.
Insert guide shaft (28) in bore of valve cap (24).
Shaft shall slide easily in bore, with no binding.
18.
Remove pin (31) and guide shaft (28) from plate
(27).
19.
Remove packing (32) and two retainers (33) from
guide shaft (28).
19.1.
Inspect guide shaft (28). Shaft shall have no
nicks or scratches.
19.2.
Insert guide shaft (28) in bore of valve cap (24).
Shaft shall slide easily in bore, with no binding.
20.
Remove pin (34) and clevis (2) from plate (27).
20.1.
Inspect bottom surface (34.1) of plate (27). There
shall be no nicks or scratches.
20.2.
Inspect clevis (2). Shaded area of clevis shall
have no nicks or scratches.
21.
Remove bearing plate (35) from body (7).
22.
Remove bearing and packing (36) from body (7).
Use spanner (37) (APP E-3).
23.
Remove two packings (38 and 39) and two
retainers (40 and 41) from bearing and packing
(36).
7-971
