TM 55-1520-240-23-6
7-267
DISASSEMBLE AND INSPECT 114HS111 RAMP CONTROL VALVE (AVIM)
(Continued)
7-267
24.
Position body (7) on work bench with caps (42)
up.
25.
Remove four valve caps (42) and four springs
(43) from body (7).
26.
Remove packing (44) and retainer (45) from
each valve cap (42).
27.
Insert dowel (46) into port (47), port (48), port
(49), and port (50), in turn, and push poppets
(51) from body (7).
28.
Remove four poppets (51) from body (7).
29.
Remove packing (52) and retainer (53) from
each poppet (51).
30.
Inspect face (54) of each poppet (51). Face shall
have no nicks or scratches.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-972