TM 55-1520-240-23-6
7-266
REMOVE RAMP CONTROL VALVE
(Continued)
7-266
NOTE
Valve without 65 shown in view A, is
typical to reflect basic installation of
hardware.
3.
Remove three nipples (6) and packings (7) from
ports C1, G2, and C3.
NOTE
Valve shown is without 65 . The
valve is typical and reflects common
locations of pressure (P) and return
(R) ports and related components.
4.
Loosen two nuts (8). Remove two tees (9),
washers (10), and packings (11) from ports P
and R.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-968
