TM 55-1520-240-23-6
7-267
DISASSEMBLE AND INSPECT 114HS111 RAMP CONTROL VALVE (AVIM)
(Continued)
7-267
7.
Remove cotter pin (13) and washer (14) from
pin (15).
8.
Remove pin (15) and washer (16) from handle
(1).
9.
Remove cotter pin (17) and washer (18) from
pin (19).
10.
Remove pin (19) and washer (20) from handle
(1).
NOTE
Detent ball will fall from valve body
when handle is removed.
11.
Remove handle (1), detent bail (21), and spring
(22) from body (7).
12.
Turn knob (23) counterclockwise and remove
from handle (1).
13.
Turn valve cap (24) counterclockwise until thread
disengages.
14.
Push clevis (2) into body (7), while pulling on
valve cap (24). Remove valve cap, with attached
parts, from body.
7-970