TM 55-1520-240-23-6
7-95
REMOVE EXTENSIBLE LINK SERVO VALVE (AVIM)
(Continued)
7-95
5.
Remove connector/receptacle (9) from bracket
(5) by unscrewing backshell (10) and sliding
down cable (1).
6.
Deleted.
7.
Deleted.
8.
Tag and disconnect three wires (11) of cable (1)
from pins 8, 9, and 10 of connector/receptacle
(9). Use insertion/extraction tool.
9.
Remove lockwire from four screws (12).
10.
Remove four screws (12) from servo valve block
(13).
11.
Remove servo valve (13) and four packings (14)
from extensible link (15). Use cloths (E135) for
spilled fluid. Use gloves (E186).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-374