TM 55-1520-240-23-6
7-86
INSTALL EXTENSIBLE LINK
(Continued)
7-86
TABLE A
NOTE
Links 145H7350-8 and -12 are interchangeable with links 145H7350 series in any
axis when authority cover is removed from faulty unit and installed on replacement
unit.
SPARE PART NO.
AUTHORITY
COVER PART NO.
DIMENSION A
(SEE FIG.)
NEW PART NO.
CONTROL AXIS
145H7350-8
145H7357-1
0.721
145H7350-5
PITCH
145H7350-8
145H7357-2
0.671
145H7350-6
ROLL
145H7350-8
145H7357-3
0.551
145H7350-7
YAW
145H7350-12
145H7357-1
0.721
145H7350-9
PITCH
145H7350-12
145H7357-2
0.671
145H7350-10
ROLL
145H7350-12
145H7357-3
0.551
145H7350-11
YAW
Replacement extensible link has
shipping cover in place of authority
cover. Authority cover from removed
link must be installed on replacement
link.
1.
On replacement (spare) extensible link (1),
remove shipping cover (2) as follows:
a.
Remove lockwire from four screws (3).
Cover is spring-loaded. Remove with
caution, otherwise personnel injury
can occur.
b.
Apply hand pressure to data plate (4) and
remove four screws (3).
c.
Remove and tag data plate (4) and shipping
cover (2).
d.
Erase or cover over -8 or -12 number on
replacement link data plate (4). Stamp dash
number and axis identification of replaced
extensible link on replacement link data plate
(4). (See table A.)
7-351
