TM 55-1520-240-23-6
7-85.2
INSTALL PISTON SEALS — ILCA EXTENSIBLE LINK (AVIM)
(Continued)
7-85.2
2.
Install ring set (4) on piston (5) with tang (6) of
spring (7) in slot (8) of ring (9).
Seal assembly P/N S33081-18P-99
must be used, otherwise component
malfunction can occur.
3.
Remove packings (10) from two seal caps (11).
3.1.
Install packings (10) in bore of gland (12).
3.2.
Install seal caps (11) in bore of gland (12).
4.
Install two packings (13) on gland (12).
5.
Install gland (12) on piston (5) opposite end to
yoke (14), with flange (15) of gland outboard.
6.
Apply compound (E75) to inside surfaces of slot
(16) in piston (5). Wear gloves (E186).
INSPECT
7.
Install piston (5) in link (3), yoke (14) first. Install
from electrical socket (17) end of link. Push
piston until slot (16) is completely visible looking
in access (18) of link.
8.
Position gland (19), on piston (5), flange (20)
inboard and against link (3).
9.
Install two screws (21) in gland (19).
10.
Install packing (22) and retainer (23) on lock
piston (24), large outer diameter.
11.
Install packing (25) and retainer (26) on lock
piston (24), small outer diameter.
12.
Install spacer (27) and spacer (28) in lock piston
(24).
INSPECT
7-346
