TM 55-1520-240-23-6
7-85.2
INSTALL PISTON SEALS ILCA EXTENSIBLE LINK (AVIM)
(Continued)
7-85.2
13.
Install piston lock (24) in access (18) of link (3)
with tang (29) down. Turn piston (5) until tang is
fully in slot (16) of piston.
14.
Install outer spring (30) and inner spring (31) in
piston lock (24).
INSPECT
15.
Install packing (32) on cover (33).
16.
Position cover (33) on link (3). Install two screws
(34). Tighten wing nuts (35).
17.
Install two screws (36).
18.
Remove two screws (34).
19.
Install remaining two screws (36).
Do not attempt to adjust extensible
self feed transducer. Damage to
component can occur.
20.
Install extensible link self feedback transducer
(Task 7-88.2).
21.
Functionally test extensible link (Task 7-97).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
7-347